Haynes Manuals Home
Results 1 to 2 of 2

Thread: Changing headlight bulbs on a 2010 Mercury Milan

  1. #1
    Join Date
    May 2010
    Posts
    1

    Default Changing headlight bulbs on a 2010 Mercury Milan

    I have tried going in from the top, front of the headlamps without success. I have tried going in through the wheel wells without success. I can't find a Haynes 201 Mercury Milan book to help me out either. It looks like the "easiest" way to get to them is by removing the shrouds in the wheel wells. However, I didn't go so far as taking off a bunch of things as I think there must be a better way to do this. Any ideas?

  2. #2
    Join Date
    Jan 2007
    Posts
    4,850

    Default

    Hi willa150,

    We're just about to begin the writing stage of the Fusion/Milan manual, and we only have factory service information up to 2009. For that year, here are the techniques - yours might be the same:

    Left side: Remove the air intake duct for access to the back of the headlight housing. The bulb holder is under a cover on the back of the housing.
    Right side: Access is through the wheel well. The windshield washer filler tube might have to be unbolted and repositioned.

    I hope this helps. Be sure to buy the manual when it comes out!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •