Haynes Manuals Home
Results 1 to 2 of 2

Thread: cooling temp sending unit problem

  1. #1
    Join Date
    Sep 2009
    Posts
    1

    Default cooling temp sending unit problem

    I have a 2000 Saturn SL1 1.9L SOHC, in the manual fig. 8.3 it shows the CTS as being near the intake hose to the engine. But on my engine there is no such sensor location.

    Saturn did make more than one engine type, and this manual does not show all types, even though it states its for '91 to '02.

    Anyway, can someone help with this?? I think that the sensor is further lower on the block, I found a sensor with yellow & black wires coming from it. I tried to remove the sensor connector but it would not budge.

  2. #2
    Join Date
    Jan 2007
    Posts
    4,850

    Default

    Hi dexcaliber,

    Look again on the left end of the cylinder head, but down a little lower and to the rear. I checked with a couple of professional-level information services, and this is the only location that was given.

    Hope this helps.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •