Haynes Manuals Home
Results 1 to 2 of 2

Thread: 2001 passat timing belt tensioner

  1. #1
    Join Date
    Feb 2008
    Posts
    5

    Default 2001 passat timing belt tensioner

    the timing belt tensioner on my passat is a little different than what is shown in my Haynes manual. the manual shows one with an "adjustment bolt". the one on my car is much simpler, essentially just a pulley with an offset mounting bolt. there is a fork that comes off the pulley and rests atop a rod which sets in the same location where the manual says a spring should be. I am 99.9% sure that this is the original factory set up. to get the belt off, I just removed the tensioner by removing the offset mounting bolt. but I need to release the tensioner to get the new belt on, and then I assume I will have to adjust the tension once the new belt is on..
    any help?
    Last edited by sclaark; 02-17-2008 at 01:17 AM.

  2. #2
    Join Date
    Jan 2007
    Posts
    4,850

    Default

    sclaark - What engine are you working with?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •