Haynes Manuals Home

Search:

Type: Posts; User: admin

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. Replies
    1
    Views
    2,542

    Sorry for the delay - lots of construction going...

    Sorry for the delay - lots of construction going on here.

    The first thing to do would be to check to see if any trouble codes have been set. Unfortunately, many consumer-grade scan tools/code...
  2. Replies
    1
    Views
    5,047

    Hi Rg77, You Sedona doesn't have a "pressure...

    Hi Rg77,

    You Sedona doesn't have a "pressure differential valve" to re-center, or proportioning valve - that's all handled by the ABS system. It is possible that a bit of air got trapped in the...
  3. Replies
    1
    Views
    3,309

    Hi topgeye, I looked in the Ford Escape...

    Hi topgeye,

    I looked in the Ford Escape factory service manual and that bump stop is not mentioned, but generally they are attached to the frame with a bolt that goes through the center. Maybe the...
  4. Replies
    3
    Views
    5,354

    Hi Cowboy, That could be. Intermittent...

    Hi Cowboy,

    That could be. Intermittent problems can be hard to track down, but if you can have a friend tap on the starter sometime when it only "clicks," then it cranks when it is tapped, you...
  5. Replies
    1
    Views
    4,546

    Any other codes besides misfire codes?

    Any other codes besides misfire codes?
  6. Replies
    3
    Views
    5,354

    Hi cowboy, Provided the battery is healthy and...

    Hi cowboy,

    Provided the battery is healthy and fully charged, yes, that sounds like a bad starter or starter solenoid. You can verify this by having someone turn the key while you tap on the...
  7. Replies
    1
    Views
    4,165

    On the non-pressure system, the coolant reservoir...

    On the non-pressure system, the coolant reservoir only acts as a container to catch coolant that escapes past the pressure cap if the system pressure exceeds the cap's pressure rating. On the...
  8. Replies
    2
    Views
    4,682

    Hey, welcome back FB14, Yes, that's on our...

    Hey, welcome back FB14,

    Yes, that's on our production schedule, but it won't be until next March or April. Stay tuned . . .
  9. Hi Sir, Modern power window systems aren't...

    Hi Sir,

    Modern power window systems aren't easy to diagnose. Add an intermittent problem like you have and it really gets tough. Multiplexed window systems like your Avenger has require the use of...
  10. Replies
    2
    Views
    4,526

    Sorry, Hermes14, but we do not produce a manual...

    Sorry, Hermes14, but we do not produce a manual for that vehicle. You might have to get a manual directly from Nissan.
  11. Hi COLLOAD, It is probably a bad sending unit,...

    Hi COLLOAD,

    It is probably a bad sending unit, but just to be safe it would be a good idea to check your oil pressure with a gauge. Since you'll be removing the sending unit to do that, you might...
  12. Replies
    1
    Views
    4,319

    The fuel pump relay is located under the right...

    The fuel pump relay is located under the right end of the instrument panel in the relay center. The oil pressure switch is shown in Chapter 2C of your manual, illustration 2.4b.
  13. Replies
    5
    Views
    7,686

    Sounds like a pretty good deal to me, if it looks...

    Sounds like a pretty good deal to me, if it looks like it's in decent shape. Also, it sounds like a pretty safe bet that you know the guy selling it won't be trying to hide anything!
  14. Replies
    1
    Views
    3,807

    Hi lr20037, Check the fluid level and the...

    Hi lr20037,

    Check the fluid level and the adjustment of the shift cable. If those are both OK, then you probably have an internal problem with the transaxle. Check to see if there are any stored...
  15. Hi Phil, The rear axle tube is a good spot...

    Hi Phil,

    The rear axle tube is a good spot (unless you're going to be doing something with the rear suspension). On the front, place the jackstands under the unibody rail-type structures right...
  16. Hi Hamza, Unfortunately we are only able to...

    Hi Hamza,

    Unfortunately we are only able to include the most typically needed diagrams in our manuals. I think you'll probably have to obtain the one you're looking for from the manufacturer (and...
  17. Hi Cowboy, No, you don't have to remove the...

    Hi Cowboy,

    No, you don't have to remove the transmission to get the valve body out. It's just shown that way in the Techbook because it was part of the overhaul procedure.

    Before going to the...
  18. Replies
    1
    Views
    4,775

    Hi dfmatty, Voltage drop is normal on those...

    Hi dfmatty,

    Voltage drop is normal on those grids. In fact, if it indicated battery voltage (or close to it), it would indicate a break in the grid between the power side and the ground side....
  19. Replies
    1
    Views
    2,650

    Hi kmac, Check your fuel pressure to make sure...

    Hi kmac,

    Check your fuel pressure to make sure it's within the specified range.
  20. Replies
    2
    Views
    2,833

    Hi Wise Guy, Yes, 1999 and later models look...

    Hi Wise Guy,

    Yes, 1999 and later models look different than what is shown in 14.2c - illustration 14.2d si what you need to go by (and it is the only illustration for the trim panel procedure in...
  21. Replies
    4
    Views
    3,988

    Oh, right - the Park/Neutral Position switch on...

    Oh, right - the Park/Neutral Position switch on the AOD isn't adjustable. Try adjusting the cable - I'll bet that takes care of it.
  22. Replies
    4
    Views
    3,988

    Hi Cowboy, Go to chapter 7B in your manual,...

    Hi Cowboy,

    Go to chapter 7B in your manual, Section 3, and try adjusting the shift linkage (cable). If that doesn't work, go to section 10 or 11, as applicable, and adjust the manual lever...
  23. Replies
    1
    Views
    2,618

    Contact one of our tech service reps at...

    Contact one of our tech service reps at 1-800-442-9637. Let them know what manual you are using and what circuit diagrams you would like. They will do what they can to help.
  24. Well, it sounds like you might have to loosen the...

    Well, it sounds like you might have to loosen the ignition switch screws and reposition it on the column. Or (and I'm not sure this is possible) when the column was reassembled, the gear that the...
  25. Call our tech service line at 1-800-442-9637. One...

    Call our tech service line at 1-800-442-9637. One of our reps might be able to get you an illustration that could help you.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4