PDA

View Full Version : 1991 Deville rear strut



joelism
01-04-2009, 11:58 PM
I am replacing the rear air-assist struts on a 1991 coupe deville, and have completed everything except the last step. My manual says "pressurize the suspension system by grounding the compressor test lead in the engine compartment for several seconds to allow the struts to compress slightly. Do this before lowering vehicle to the ground." There is no indication anywhere in the manual about where this test lead is on the compressor, or how to ground it. I know where the compressor is but need more info about this test lead. Any help would be sincerely appreciated. Thanks.

admin
01-05-2009, 06:49 PM
Hi joelism,

The test connector is taped to the harness leading to the compressor, just forward of the compressor and towards the fender (kind of near the horns). It's a single-wire lead, and a simple jumper wire can be used to connect it to a good ground.