PDA

View Full Version : 2009 Ford Fusion Window Regulator



rjward09
07-08-2014, 04:09 PM
Can you explain how to remove the rear driver side window regulator from the bracket. The regulator is riveted and I do not see a way other then tapping the rivets out to replace the regulator.

admin
07-09-2014, 10:47 PM
Hi rjward,

In Haynes manual 36045, Chapter 11, Section 17, it shows how to remove the window regulator - it's actually the entire door "module." The Ford factory service manual procedure is the same, and they don't go any farther than removing the entire module with the regulator. You should check with a Ford dealer parts department to see if the regulator is available separately. I hope it is, because it'd be a shame to have to buy the whole module! If you can get the regulator by itself, either through a dealer or other source (salvage yard maybe?), you'll have to drill out the rivets and use bolts and nuts to secure the replacement.

Good luck!